This competition is about to be drawn live / has been drawn live on our Facebook page. Please check the winners page for all details, including the live draw video and public record of the entries.
Electric Brake
Variable speed control trigger
Forward/reverse rotation
Twin LED job light
High rotation speed
One-touch bit installation
Ergonomically designed soft grip handle
Compact overall length of 137mm
Lightweight design
Battery protection circuit
Belt clip
Electric brake
Variable speed control trigger
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current
Forward and reverse trigger
LED job light
Ergonomic soft grip
Simple to operate electronic push button switch with 3-speed settings
Connectable to dust extractor
Compact design with short height and lower centre of gravity for better manoeuvrability
Tool-less blade change
Trigger switch with lock-off lever
Electric brake
Variable speed
Ergonomically designed handle
Newly designed crank mechanism for higher efficiency
High power
3-Mode Switch for rotation only, hammering with rotation, or hammering only
2x faster drilling with synchronized RPM and BPM for more efficient drilling
Built-in torque limiter clutch disengages if bit jams when hitting rebar
Chisel rotates 360° with 40 different positions to get the best working
Ergonomic shape fits like a glove with even pressure and easy control
LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power)
Electric brake
Forward/reverse rotation
Job light
Rotary hammer action
Rotary only action
Variable speed trigger
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Lithium-ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Double safety trigger.
High comfort grips.
Removable dust nozzle.
Ergonomically rubberised handle provides comfortable gripping and more control while minimising hand fatigue and pain.
The large 2 finger variable speed trigger makes this jigsaw easy to operate even with gloves on.
3 orbital settings + straight cut.
Blower will clear the pencil line of dust.
Lightweight and compact.
Tool-less blade change – push in lock system enables very fast blade changes.
LED light will illuminate your cut line.
Smooth and powerful cutting at the high stroke speed at 2,600 spm.
Double insulated.
Soft start.
Planes a width of 82mm (3¼”) in a single pass.
Fitted with a comfortable operator handle.
Easy to use adjustable depth settings.
A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal.
The lock -on button gives the operator the option of continuous operation.
Left and right handed use due to the buttons on either side of the handle.
Dust extraction port on the side.
Adjustable up to a 2mm depth of cut.
Shoe on the underside stops accidental laying down of planer while blade is still moving.
Rebates to a maximum depth of 9mm.
22 minute charge time with the air cooled Makstar Optimum Charging System.
Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time.
Lithium -ion’s 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery.
Electric Brake
Variable Speed Trigger
Forward/Reverse rotation
LED job light
Battery protection circuit
Ergonomically designed handle with rubber made soft grip
Rubberised soft grip of ergonomic design
4 position pivoting head
Falling impact strength of 1m
18v torch for use with lithium-ion batteries
3 x 5.0Ah BL1850 Batteries
2 x DC18RC Charger
1 x 831278-2 LXT400 Carry Bag
1 x 831279-0 LXT600 Carry Bag
Part Number: T4TKIT-263
Barcode: 8906701785746
Barcode: 0088381699099
Battery Type: Li-ion
Voltage: 18V
Driving Shank: 6.35mm (1/4″ Hex)
Machine Screw: M4-M8
Standard Bolt: M5-M16
High Tensile Bolt: M5-M12
Coarse Thread: 22-125mm
Impacts per minute: 0-3500 ipm
No Load Speed: 0-2900 rpm
Max Tightening Torque: 165Nm
Sound Pressure: 93 dB(A)
Sound Power: 104 dB(A)
Sound K Factor: 3 dB(A)
Vibration: 10.5 m/s²
Vibration K Factor: 1.5 m/s²
Barcode: 0088381660112
Grinding Wheel: 4-1/2″ / 115mm
Max Wheel Diameter: 4-1/2″ 115mm
No Load RPM: 10,000
Watt Hours: 54.0
Overall Length: 12-1/2″
Barcode: 0088381658584
Voltage: 18V
Orbits per Minute: 7000/9500/11000 opm
Orbit Diameter: 2.8 mm
Battery Type: Lithium-ion
Sanding Stroke per Minute: 14000/19000/22000 spm
Speed Control: 3 stage push button
Charging Time: 22 min
Pad brake: Yes
Paper Fastening: Hook & Loop
Pad Size: 123 mm
Paper Size: 125 mm
Maximum Output: 190w
Barcode – 0088381806640
Battery Type – Lithium-ion
Body only machine – Yes
Voltage – 18 V
Capacity in Wood – 255 mm
Capacity in Mild Steel Pipe – 130 mm
Strokes per Minute – 0 – 2,800 spm
Stroke Length – 32 mm
Noise sound pressure – 84 dB(A)
Noise sound power – 95 dB(A)
Noise K factor – 3 dB(A)
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Wood – 12.5 m/sec²
Vibration: Cutting Chipboard – 13.0 m/sec²
Voltage: 18v
Shank Type: SDS+ Plus
Capacity in Concrete: 20mm
Capacity in Steel: 13mm
Capacity in Wood: 26mm
Impacts per Minute: 0-4,000 ipm
Impact Energy: 2.0 J
No Load Speed: 0-1,100 rpm
Overall Length: 358 mm
NOISE & VIBRATION:
Vibration: Drilling: 3 m/sec²
Vibration: Chiselling: 11 m/sec²
Vibration: Hammer Drilling: 145 m/sec²
Vibration K Factor: 15 m/sec²
Noise Sound Pressure: 87 dB(A)
Noise Sound Power: 98 dB(A)
Noise K Factor: 3 dB(A)
Barcode: 0088381663014
Voltage – 18V
Depth of Cut @ 90° – 57mm
Blade Diameter – 165mm
Depth of Cut @ 45º – 40mm
Depth of Cut @ 50° – 36mm
Bore Diameter – 20mm
Noise sound pressure – 91 dB(A)
Noise sound power – 102 dB(A)
Noise K factor – 3 dB(A)
No Load Speed – 3700 rpm
Vibration K factor – 1.5 m/sec²
Vibration: Cutting Chipboard – 2.5 m/sec²
Barcode – 0088381662710
Voltage – 18V
Max in steel – 10mm
Max in wood – 135mm
Strokes per Minute – 0-2600 spm
Stroke Length – 26mm
Noise sound pressure – 78 dB(A)
Noise K factor – 3 dB(A)
Vibration K factor – 1.5 m/sec²
Vibration Cutting Chipboard – 8 m/sec²
Vibration Cutting Sheet Metal – 3.5 m/sec²
Barcode: 00088381662635
Planing Width: 82mm – 3¼”
Planing Depth: 2mm
Max rebate depth: 9mm
Battery type: Li -ion
Charging Time: 22 min
No load speed: 14000rpm
Barcode: 0088381811996
Voltage: 18V
Battery type: Li-ion
Driving Shank: 1/2inch (12.7mm) Square
Capacity: Standard Bolt: M8-M16
Capacity: High Tensile Bolt: M8-M12
Impacts per minute: 0-3000 ipm
No load speed: 0-2300 rpm
Max Tightening Torque: 190 Nm
Vibration: 8.5m/s
Vibration K factor: 1.5m/s squared
Sound pressure level: 94dB(A)
Sound power level: 105 dB(A)
Sound K factor: 3 dB(A)
Barcode: 0088381675628
Part Number: DML185
Voltage: 18V
Guaranteed Live Draws Every Monday & Thursday @ 8pm. No rollovers, no extensions!
This website is not intended for audiences under 18 years old.
A free Entry option is available for all Entrants by sending a postal Entry.
To enter for Free by postal Entry, you must first create an Account on the Website, then clearly write on a Postcard, your full name, full address, email address used to register your Account, date of birth, contact telephone number and the name of the specific Competition you wish to enter to the Promoter. Free Entries must be posted to Paragon Competitions Limited, 3000 Aviator Way, Manchester Business Park, Manchester, M22 5TG. Postage must be paid by the Entrant and business postage solutions must not be used.
Free Postal Entries are limited to One Entry Per Person/Account, Per Competition, Per Postcard.
All Entries must be sent individually and Postcards sent in envelopes will not be accepted, we will not accept hand delivered entries, they must be sent via the Royal Mail postal service.
In the interest of fairness, Paragon Competitions reserves the right to ban anybody that is suspected of misuse, cheating or automating entries. Any automated entries or suspected automated entries will not be accepted and anybody suspected or deemed to be attempting to make automated entries will be permanently banned from Paragon Competitions. Automated entries can include but is not limited to; printing post cards in volume, use of a franking machine or use of business postage solutions.
Free postal Entries received while the Competition is still open will be entered into the draw and will be treated exactly the same as a paid entry. Any free postal Entries received after the Competition has closed will not be entered into the Draw. You will not be deemed to have Entered a Competition until the Promoter confirms your Entry either by email or by adding your Entry to the Recent Orders area of your Account.
Free postal Entries with incomplete information will not be Entered into the Draw.
The Promoter will not be held responsible for any lost free postal Entries which don’t arrive at the Promoter’s address.
The Promoter will not be held responsible for any free postal Entries which do not arrive before the Competition closes. A Competition may close due to all Entries being allocated or the countdown timer of the Competition reaching zero.